The board is immediately operational and can be used for development of
projects with TINY-Tiger™ and also directly for your applications.
Through serial channel Ser1 and a DB9 connector a PC can be connected
1:1 and a plugged-in TINY-Tiger™ is ready for download and debugging.
About 50% of the Prototyping Board are assembled with everything often
needed for a small project: Voltage regulation, text LCD connector,
key-matrix input, signal LEDs, 2 RS232 interfaces, mode switch, reset,
contrast and signal pins for measurering and wiring.The remaining 50%
of the board area are designed as patch area for assembly of needed
components.