DIR_PORT 8,0			  ' Port 8 to Output (for Graphic-Kits)
  DIR_PORT 7,0			  ' Port 7 to Output (for Graphic-Kits)
  OUT 7,00000010b,00000000b       ' RESET LCD (for Graphic-ToolKit)
  OUT 7,00000010b,00000010b       '     "     (for Graphic-ToolKit)
  OUT 8,11111111b,11011111b       ' set CTRL-Pins of LCD T6963C high except Pin 5 (Graphic-ToolKit)


'----------------------------------------------------------------------------------------
' Parameter-No:		1    0	'  BUS-PORT
' Parameter-No:		2    0	'  PORT-Adr CTRL signals: <-WR,-RD,-CE,C/D>
' Parameter-No:		3a   EE	'  Bit-Pos: (0...7)  -WR    / Parameter set
'			3b    -	'  Bit-Pos: (0...7)  -RD   /  is always given
'			3c    -	'  Bit-Pos: (0...7)  -CE  /   completely (4 bytes)
'			3d    -	'  Bit-Pos: (0...7)  C/D /    or not at all:
'				'			      1 Flag = 0EEH;
'
'				' Select LCD-Type:
'				'     W  x  H  lin   col  Char  RAM
' Parameter-No:		4    EE	' 0: 128 x  64,  8 x 16   8x8       <- Default
'				' 1: 128 x  64,  8 x 16
'				' 2: 128 x 128, 16 x 16
'				' 3: 240 x 128, 16 x 30   8x8   32 Kbyte
'				' 4: 240 x 128, 16 x 30   8x8    8 Kbyte !
'				' 5: 192 x 128, 16 x 24   8x8
'				' 6: 240 x 128, 16 x 40   6x8    8 Kbyte
'				' 7: 128 x  64,  8 x 21   6x8    x Kbyte
'				' 8: 192 x 128, 16 x 32   6x8    x Kbyte
'				' 9: 128 x 128, 16 x 16   8x8    x Kbyte
'				'10: 128 x 128, 16 x 21   6x8    x Kbyte
'				'11: 240 x 128, 16 x 40   6x8    8 Kbyte  <-- you see how the next
'									      graphic screen is written.
'									      More RAM --> Choose type 3 !
'
' Parameter-No:		5     0	' Transmission rate for graphic:
'				' in kByte per second: 4...120
'
'				' up to 120 KB/s: VERY high speed
'				' up to 100 KB/s: Improved high speed
'				' up to 88 KB/s:  High speed
'				' up to 40 KB/s:  Slowed down a bit, good for most applications
'
'  Parameter-No:	6    EE	' Transmission speed at burst
'				' 10H: Very high speed, EXT-Buf 128 Byte (zB.PIC)
'		-->  Default	' 11H: Improved high speed, NO ext.Buf, 1:1 Connect
'				' 12H: High speed, NO ext.Buf, 1:1 Connect
'		-->  		' 13H: slowed down a bit, NO ext. buffer !
'				'
'----------------------------------------------------------------------------------------
'			Parameter --> 1 2  3      4      5  6
  INSTALL_DEVICE #LCD2,"LCD-6963.TDD",0,0,0EEH,LCD_TYPE, 88,11H' LCD=240x128, 88 KB/s, fast